YeongYang - PH2-6500P EPS 12V Switch Power Supply - Professional manufacturer of computer case

Europe - America - Russia

> INPUT CHARACTERISTICS:
	VOLTAGE: 90~264 VAC FULL RANGE
	FREQUENCY: 47 - 63 Hz
	INPUT CURRENT: 6.0 A ( RMS ) FOR 115 VAC 3.0 A ( RMS ) FOR 230 VAC
	INRUSH CURRENT: 65 A MAX. FOR 115 VAC 125A MAX. FOR 230 VAC
> SPECIFICATION
	TEMPERATURE RANGE : OPERATING 0^oC --- 40^oC, STORAGE -20^oC --- 80^oC
	HUMIDITY : 10 ~ 90% RH
	HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
	DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
	EFFICIENCY: 71% TYPICAL, AT FULL LOAD 115VAC
	POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
	OVER LOAD PROTECTION: 110 ~150% MAX.
	OVER CURRENT PROTECTION: +5V44A ~ 60A, 3.3V33A ~ 45A , 12V27.5A ~ 37.5A
	OVER VOLTAGE PROTECTION: +5V5.7 ~ 6.5V, 3.3V3.9 ~ 4.3V ,12V13.6 ~ 15V
	SHORT CIRCUIT PROTECTION: SHUTDOWN AND LATCH
	EMI : MEET FCC CLASS B, CISPR22 CLASS B
	SAFETY: MEET UL 1950, CSA 22.2 NO/ 950, TUV IEC 950
	REMOTE ON / OFF CONTROL
	MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
	COOLING: ONE 80mm DC FAN
	DIMENSION: 140 (D) x 150 (W) x 86 (H) mm (PS/2)

> INPUT CHARACTERISTICS:

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT RIPPLE & NOISE MAX.[P-P]
OUTPUT VOLTAGE	MIN.(A)	MAX.(A)	LOAD	LINE	OUTPUT RIPPLE & NOISE MAX.[P-P]
+5V	5.0	40	± 5%	± 1%	60mV
+12V	2.5	25	± 5%	± 1%	100mV
-5V	0	0.8	± 5%	± 1%	100mV
-12V	0	1.0	± 5%	± 1%	100mV
+3.3V	1.0	30	± 5%	± 1%	60mV
+5VSB	0.1	2	± 5%	± 1%	60mV

REMARK:
TOTAL POWER OUTPUT NOT EXCEED 460W
*** WHEN IT PEFORMS CROSS REGULATION TEST, IT IE REQUESTED TO SET THE HIGHER OUTPUT CHANNEL AT 90% MAX. OF IT'S SPEC. AND THE LOWER OUTPUT CHANNEL AT 20% MIN. OF THEIRS

BACK / HOME